Veto Pro Pac Parts Bags

Veto Pro Pac’s Parts Bag is a 4-Pac solution to the clutter dilemma.

In stock
Category: Tool Bags

Veto Pro Pac Parts Bags

Veto Pro Pac’s Parts Bag is a 4-Pac solution to the clutter dilemma.


  • Veto Pro Pac’s PB4 is a 4-Pac Solution to the Clutter Dilemma.
  • YKK™ Zippers
  • 600 Denier Nylon Body Fabric
  • See Through Side Mesh Panel
  • Zippered Access
  • Color-Coded Webstrips
  • Swivel Snap Hooks Attach to any Veto Pro Pac Tool Bag’s D-Rings
  • Stores
    • Small Tools
    • Fasteners
    • Assorted Items
  • Multi-Purpose for Jobsite & Everyday Use

Parts Bags: VETOPB4 – 4 Pack

  • Length: 267mm
  • Height: 185mm

Parts Bags: VETOPB4L – 4 Pack

  • Length: 305mm
  • Height: 230mm

Parts Bags: VETOPB5 – 5 Pack

  • Length: 230mm
  • Height: 140mm


Key Features:
Stores small tools, fasteners, wire nuts and assorted items
Multi-purpose for job site and everyday use
Zippered access

Rugged Materials & Construction:
600 denier nylon body fabric – reduces wear and tear
Reinforced see through side mesh panel – clear visibility of contents
YKK™ zippers
Colour coded webstrips
Swivel snap hooks – attach to any Veto Pro Pac tool bag’s D-rings

Keep the Zippers Clean
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers from Sharp Objects and Extreme Heat 
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

DON’T Overstuff the Bags
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!

Product categories

Subscribe to our eNews!

AIR Member

Become an AIR Member now to
receive DISCOUNTS and offers!

Product Search


Can’t find the part? Fill in my quick form with the basic details and I’ll do my best to identify the part and supply you with a price.

Related Products
Call Now Button